Holybro Kakute H743 Micro M9N bez pinów
Opis
Wersja Do wybory powyżej:Holybro Kakute H743-Wing Micro M9NHolybro Kakute H743-WingHolybro Kakute H743 Wing (w/ Pin Header Soldered)Holybro Kakute H743-Wing Pin Header Soldered + Micro M9Nzdjęcia poglądoweThe Holybro Kakute H743 Wing is a full featured flight controller with layout specifically for fixed wing & VTOL applications. It has the STM32 H743 Processor running at 480 MHz and CAN Bus support, along with dual camera support & switch, ON/OFF Pit Switch, 5V, 6V/8V, 9V/12 BEC, and plug-and-play GPS, CAN, I2C ports.
FeaturesSTM32H743 MCU running at 480 MHzHigh-Precision / low-noise ICM-42688-P IMUCAN Bus SupportDual Camera Inputs switch3 On-board BEC output 5V, 6V/8V and 9V/12V9V/12V ON/OFF Pit SwitchOn-board voltage & current sensorIntegrated BMP280 barometerPlug-and-play GPS, CAN, I2C portsSmall & low-profile design fits into compact framesSupports INAV (6.1.1 & later), Ardupilot (4.4 & later)SpecificationsMCU: STM32H743, 480 MHz, 1MB RAM, 2MB FlashIMU: ICM-42688P (SPI3)Baro: BMP280 (I2C4)OSD: AT7456E (SPI2)Blackbox: MicroSD card slot on SDMMC27x Uarts (1,2,3,5,6,7,8) with built-in inversion.14x PWM outputs, 1x CAN, 5x ADC (Bat1/Curr1, Bat2/Curr2 and RSSI)3x I2C (I2C1 and I2C2 for external devices, I2C4 for onboard sensors)3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator (Green)USB/DFU Key Extender with USB Type-CDual Camera Inputs switch5V/9V(12V) for Camera/VTX power switchHigh-precision Current Sense (90A continuous, 220A peak)Battery Voltage Sensor: 5K:25.5K (Scale 1800 in INAV, BATT_VOLT_MULT 18.18 in ArduPilot)Static power 160mA@5VFirmware SupportArdupilot Target: INAV Target: PDBInput voltage range: 10~36V (3~8S LiPo)1x ESC power padsCurrent Sense: 90A continuous, 220A peak. (Scale 275 in INAV, 36 A/V in ArduPilot)BEC 5V outputDesigned for FC, Receiver, OSD, Camera, 2812 LED Strip, Buzzer, GPS, Air Speed Sensor, etc.
Output 5.15 +/- 0.1V DCContinuous current 2 Amps, 3A PeakBEC 9V /12V outputDesigned for Video Transmitter, Camera, Gimbal etc.
Continuous current 2 Amps, 3A Peak12V option with Jumper padBEC Vx outputDesigned for ServosVoltage adjustable, 6V Default, 8V option with Jumper padContinuous current 6 Amps, 8A PeakBEC 3.3V outputLinear RegulatorContinuous current: 200mAMechanicalMounting: 25 x 25mm, M2 holeDimensions: 45x 30 x 13.5 mmWeight: 28g with USB extenderReference LinkPackage Includes:1x Kakute H743-Wing Flight Controller1x Power Board1x Top Board1x USB-EXT Board1x GPS Module (Optional)1x Electrolytic capacitor: 220uF 62v2x XT60 60mm Power Cable 4x Sets 2.54 DuPont Pin2x JST-GH 4Pin Cable1x 15cm JST-SH 6Pin Cable (For USB-EXT Board)Manual: